IJS KOLOKVIJ, četrtek 28. 3. 2019, ob 12.00 uri, Prof. dr. Jean-Claude André

[Natasa Gosevac]

Vabimo vas na 13. predavanje iz sklopa "Kolokviji na IJS" v letu 2018/19, ki
bo v četrtek, 28. marca 2019, ob 12. uri v Veliki predavalnici Instituta
>Jožef Stefan<  na Jamovi cesti 39 v Ljubljani. Napovednik predavanja
najdete tudi na naslovu http://www.ijs.si/ijsw/Koledar_prireditev, posnetke
preteklih predavanj pa na http://videolectures.net/kolokviji_ijs. 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~



Prof. dr. Jean-Claude André

LRGP-UMR 7274 CNRS-UL and INSIS-CNRS

4D tiskanje in biotiskanje v potencialnih poljih: korak bliže k masovni
uporabi

Avtor predavanja je prvi na svetu leta 1984 patentiral 3D tiskanje. Postopek
temelji na gradnji strukture po principu zaporednega dodajanja osnovnih 3D
gradnikov, ki določajo končno kompleksno obliko vzorca. Od takrat se je
koncept izdelave kompleksnih struktur nadgradil do te mere, da omogoča
prilagajanje oblike objekta v enem ali več potencialnih poljih odvisno od
okolice. Slednje definira osnovno idejo 4D tiskanja in Bio-tiskanja, ki je
poenostavljeno povedano 4D tiskanje žive materije. V predavanju bo
predstavljeno, kaj vse te tehnologije v nastajanju omogočajo. Prikazane bodo
sedanje omejitve in nekatere poti, kako preseči tehnološke prepreke
(kompleksnost), pa tudi izzivi teleologije, epistemologije in fleksibilne
organizacije, predvsem v kontekstu vedno krajših časovnih okvirjev za dosego
rezultatov. Obdobje >enostavnih< idej, kot je bilo 3D tiskanje leta 1984, je
zaključeno, prihaja nova doba.

Predavanje bo v angleščini.

Lepo vabljeni!

*****

 




We invite you to the 13th Institute colloquium in the academic year 2018/19.
The colloquium will be held on Thursday March 28, 2019 at 12 PM in the main
Institute lecture hall, Jamova 39, Ljubljana. To read the abstract click
http://www.ijs.si/ijsw/Koledar_prireditev. Past colloquia are posted on
http://videolectures.net/kolokviji_ijs.

********************************************

Prof. dr. Jean-Claude André

LRGP-UMR 7274 CNRS-UL and INSIS-CNRS

 

4D printing and bio-printing: the "mass" is not yet over!

 

The author was the first who patented 3D printing in 1984, based on the
voxel by voxel addition of a selected material to a complex structure under
construction. Since then, fabrication paradigms advanced so that it is
nowadays possible to modify the shape of the objects created in one or more
potential fields by modifying the environment. This defines the basic idea
of 4D printing and of Bio-printing, which is, in simple words, 4D printing
of living things. The lecture will deal with what these emerging
technologies represent. It will emphasize their current limits and underpin
few ways to break current scientific barriers (complexity), teleology,
epistemology and flexible organization in a context where results must be
obtained as quickly as possible. The period of "simple" ideas, like for 3D
printing in 1984, is over.

 

Cordially invited!

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.ijs.si/pipermail/kolokvij-ijs/attachments/20190328/8f903142/attachment.htm>