IJS KOLOKVIJ, sreda, 26. maj 2010, prof. Sergey V. Reznik

Andreja Berglez andreja.berglez at ijs.si
Mon May 24 12:32:03 CEST 2010


Vabim vas na 15. predavanje iz sklopa "Kolokviji na IJS" v letu 2009/10, ki
bo v sredo, 26. maja 2010, ob 13. uri v Veliki predavalnici Instituta >Jožef
Stefan< na Jamovi cesti 39 v Ljubljani. Napovednik predavanja najdete tudi
na naslovu http://www.ijs.si/ijsw/Koledar_prireditev, posnetke preteklih
predavanj pa na http://videolectures.net/kolokviji_ijs. 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~



 

Prof. Sergey V. Reznik

Bauman Moscow State Technical University (BMSTU), Moskva, Rusija

 

 

Inverzne rešitve pri prenosu toplote: Uporaba in razvoj novih tehnologij
izdelave za keramike

 

Prenos toplote preko prevajanja in sevanja je izredno pomemben pri skoraj
vseh proizvodnih procesih. Na Bauman Moscow State Technical University se s
tem problemom ukvarjajo že vse od konca 70-ih let. V predavanju bosta
predstavljena dva primera uporabe njihovih izračunov. V prvem primeru bodo
predstavljene študije termo-fizikalnih lastnosti naprednih materialov. V
drugem primeru pa načrtovanje novih tehnologij izdelave keramičnih
materialov. 

Predavanje bo v angleškem jeziku.

Lepo vabljeni!

***

We would like to invite you to 15th lecture of the "Kolokvij na IJS" in the
school year 2009/10. The lecture will be held on Wednesday, May 26, 2010 at
1 pm at JSI main lecture hall, Jamova 39, Ljubljana. The abstract of the
lecture can be found on website:
<http://www.ijs.si/ijsw/Koledar_prireditev>
http://www.ijs.si/ijsw/Koledar_prireditev, the previous recorded lectures
can be found on website:  <http://videolectures.net/kolokviji_ijs>
http://videolectures.net/kolokviji_ijs. 

********************************************



 

prof. Sergey V. Reznik

Bauman Moscow State Technical University (BMSTU), Moskva, Rusija

 



Inverse Problem Solutions in Heat Transfer: Applications in Development of
New Manufacturing Technologies for Ceramics and Glass, and Studies of
Advanced Materials Thermophysical Properties

 

 

The radiative and conductive heat transfer (RCHT) dominates in most of
modern machines and manufacturing technologies. At Bauman MSTU there have
been worked out methods, algorithms and software package "CAR" (Conduction
and Radiation) for solving direct problems (DP) and inverse problems (IP) of
RCHT in composite materials and constructions since the end of 1970's.
Numerical methods of solving DP, extreme statements of IP, numerical
optimization of residual functionals and iterative regularization methods
form the theoretical base of the package "CAR" approaches. The package "CAR"
was used for researches on project reusable launch vehicles "Buran",
"Hopper", large space frame "SOFORA", large deployable space antenna NPO
EGS. For today the software package "CAR" is the base for the current
studies of advanced materials for aerospace applications and in development
of new manufacturing technologies.

 

In the lecture two branches of RCHT IP application are presented. The first
branch connected with studies of advanced materials thermophysical
properties. The second branch connected with designing new manufacturing
technologies for ceramics and glass. Mathematical modeling has been
performed in the frame of development three heat treatment technologies as
infrared annealing, thermal polishing and sintering of glass ceramics.

 

We look forward to meeting you at the "Kolokvij na IJS"!

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.ijs.si/pipermail/kolokvij-ijs/attachments/20100524/d2ddf5a8/attachment.html>


More information about the kolokvij-ijs mailing list